Product catalogue
Equipment for every laboratory.
Syllabus-mapped apparatus designed and built in Roorkee. Filter by department or search by experiment — then request a quotation in one tap.
All equipment
Browse the complete Sanmati range across every engineering and science department.
142 ITEMS
- FLUID MECHANICS
Pelton Wheel Turbine Test Rig
Impulse turbine test rig with spear-valve controlled nozzle, transparent casing and rope-brake dynamometer to study the performance of a Pelton wheel at constant head and speed.
- FLUID MECHANICS
Francis Turbine Test Rig
Mixed-flow reaction turbine with adjustable guide vanes, spiral casing and draft tube, coupled to a brake drum for full performance testing.
- FLUID MECHANICS
Kaplan Turbine Test Rig
Axial-flow propeller turbine rig with adjustable runner and guide vanes for studying low-head, high-discharge turbine behaviour.
- FLUID MECHANICS
Centrifugal Pump Test Rig
Variable speed centrifugal pump set with sump tank, measuring tank, suction and delivery gauges and energy meter for complete pump characteristics.
- FLUID MECHANICS
Reciprocating Pump Test Rig
Double-acting reciprocating pump with air vessels, measuring tank and pressure gauges to study slip, coefficient of discharge and efficiency.
- FLUID MECHANICS
Cut Section Model of Single Stage Centrifugal Pump
Sectioned industrial pump showing impeller, volute casing, shaft seal and bearings — ideal for classroom demonstration of pump construction.
- FLUID MECHANICS
Bernoulli's Theorem Apparatus
Converging–diverging transparent duct with piezometer tubes along its length for verifying Bernoulli's equation experimentally.
- FLUID MECHANICS
Reynolds Experiment Apparatus
Constant-head tank with a glass flow tube and dye injector to visualise laminar, transitional and turbulent flow regimes.
- FLUID MECHANICS
Hydraulic Ram Test Rig
Working hydraulic ram that lifts water to a higher level using the water hammer effect, with supply and delivery measuring arrangements.
- FLUID MECHANICS
Impact of Jet Apparatus
Nozzle and interchangeable vanes (flat, inclined and hemispherical) in a transparent chamber with a lever-weight balance.
- FLUID MECHANICS
Metacentric Height Apparatus
Floating pontoon with adjustable jockey weight and plumb-bob scale for determining the metacentric height and stability of floating bodies.
- FLUID MECHANICS
Losses in Pipe Fittings Apparatus
Pipe circuit with sudden enlargement, contraction, bends and elbows, fitted with manometers to measure minor losses.
- FLUID MECHANICS
Orifice Meter & Venturimeter Apparatus
Pipeline fitted with orifice and venturi meters, differential manometer and measuring tank to determine coefficients of discharge.
- FLUID MECHANICS
Pitot Tube Apparatus
Pitot-static tube traversing a flow section with a manometer to measure point velocity and velocity distribution.
- FLUID MECHANICS
Free & Forced Vortex Apparatus
Transparent cylindrical vessel with interchangeable orifices and a paddle drive to generate and measure free and forced vortex profiles.
- FLUID MECHANICS
Jet Pump Test Rig
Jet pump installation with suction and delivery gauges and collecting tank for studying ejector-type pump performance.
- FLUID MECHANICS
Rotameter Calibration Rig
Variable-area flowmeter mounted on a flow bench with measuring tank for calibration against actual discharge.
- FLUID MECHANICS
Notch Apparatus (Rectangular & V-Notch)
Flow channel with interchangeable rectangular, triangular and trapezoidal notches and hook gauge.
- FLUID MECHANICS
Stokes' Law Apparatus
Tall glass cylinders filled with viscous liquids and steel balls to determine viscosity by falling-sphere method.
- FLUID MECHANICS
Subsonic Wind Tunnel
Open-circuit suction wind tunnel with transparent test section, multi-tube manometer and model set for aerodynamic studies.
- MATERIAL TESTING
Universal Testing Machine
Hydraulically operated UTM for tension, compression, bending and shear tests on metals and other materials, with load indicator and accessories.
- MATERIAL TESTING
Torsion Testing Machine
Hand/motor operated torsion tester with torque measuring unit and troptometer for determining modulus of rigidity.
- MATERIAL TESTING
Rockwell Hardness Tester
Dial-type Rockwell hardness tester with diamond and ball indenters for HRA, HRB and HRC scales.
- MATERIAL TESTING
Combined Rockwell cum Brinell Hardness Tester
Dual-purpose hardness tester (capacity 187.5 kgf) with Brinell microscope, for both Rockwell and Brinell methods.
- MATERIAL TESTING
Impact Testing Machine (Izod & Charpy)
Pendulum impact tester with Izod and Charpy strikers and specimen supports for notched-bar impact tests.
- MATERIAL TESTING
Fatigue Testing Machine
Rotating-beam fatigue tester with revolution counter and auto cut-off to determine the endurance limit of specimens.
- MATERIAL TESTING
Spring Testing Machine
Load frame for testing open- and close-coiled helical springs in compression and tension.
- MATERIAL TESTING
Erichsen Cupping Test Machine
Sheet-metal ductility tester measuring cup depth at fracture for formability assessment.
- MATERIAL TESTING
Searle's Apparatus (Torsion Pattern)
Searle's pattern apparatus for determining Young's modulus and modulus of rigidity of wires.
- MATERIAL TESTING
Shear Force & Bending Moment Apparatus
Simply supported beam with a cut section and spring balances to measure shear force and bending moment under loads.
- MATERIAL TESTING
Elastic Properties of Deflected Beam Apparatus
Beam supports, dial gauges and weights for verifying deflection formulae and Maxwell's reciprocal theorem.
- MATERIAL TESTING
Unsymmetrical Bending Apparatus
Cantilever angle-section with rotating load arrangement to study unsymmetrical bending and principal axes.
- MATERIAL TESTING
Portal Frame Apparatus
Portal frame with interchangeable supports (fixed, hinged, free) for studying horizontal thrust and deflection.
- MATERIAL TESTING
Suspension Bridge Apparatus
Two-hinged stiffening girder suspended by a cable for studying cable tension and influence lines.
- MATERIAL TESTING
Joint Roof Truss Apparatus
Pin-jointed roof truss with spring balances in members to compare measured and computed forces.
- THERMAL
Thermal Conductivity of Metal Rod Apparatus
Insulated metal bar with heater, cooling jacket and thermocouples along its length for determining thermal conductivity.
- THERMAL
Natural Convection Apparatus
Vertical heated tube in a duct with thermocouples to determine the natural convection heat transfer coefficient.
- THERMAL
Pin Fin Apparatus (Natural & Forced Convection)
Pin fin in a duct with blower and thermocouples to study fin efficiency under natural and forced convection.
- THERMAL
Parallel & Counter Flow Heat Exchanger
Double-pipe heat exchanger with valves to switch between parallel and counter flow, with rotameters and temperature indicators.
- THERMAL
Heat Pipe Demonstrator
Comparison of a heat pipe, copper pipe and stainless pipe of the same geometry to demonstrate the superior conductance of a heat pipe.
- THERMAL
Stefan–Boltzmann Apparatus
Hemispherical enclosure with test disc for determining the Stefan–Boltzmann constant of radiation.
- THERMAL
Two Phase Heat Transfer Apparatus
Glass chamber with heater and condenser coil to visualise boiling regimes and condensation.
- THERMAL
Ice Plant Test Rig
Working vapour-compression ice plant with brine tank and ice cans to study refrigeration performance.
- THERMAL
Heat Pump Test Rig
Air/water heat pump trainer with instrumentation for coefficient of performance studies.
- THERMAL
Window Air Conditioner (Cut Section)
Sectioned working window AC showing compressor, condenser, evaporator and expansion device.
- THERMAL
Model of Steam Engine with Boiler
Working demonstration model of a steam engine coupled to a small boiler for teaching steam power fundamentals.
- THERMAL
Model of Steam Turbine
Sectional model of an impulse/reaction steam turbine showing nozzles, blades and casing.
- THERMAL
Digital Bomb Calorimeter
Oxygen bomb calorimeter with digital temperature readout for determining calorific value of solid and liquid fuels.
- AUTOMOBILE
Four Stroke Single Cylinder Diesel Engine (Cut Section)
Sectioned diesel engine mounted on a stand, showing piston, valves, injector and crank train in motion.
- AUTOMOBILE
Four Stroke Four Cylinder Petrol Engine (Cut Section)
Multi-cylinder petrol engine sectioned to reveal firing order, valve train and cooling passages.
- AUTOMOBILE
MPFI System with Engine (Working Model)
Working multi-point fuel injection system mounted with engine, sensors and ECU for live demonstration.
- AUTOMOBILE
Fuel Supply System of Four Cylinder Diesel Engine
Actual working model of diesel fuel supply with FIP, filters, injectors and lines.
- AUTOMOBILE
Synchromesh Gear Box (4/5 Speed)
Sectioned manual gearbox with gear shift lever showing synchromesh engagement for each speed.
- AUTOMOBILE
Automatic Transmission Gear Box (Cut Section)
Sectioned automatic transmission with torque converter and planetary gear sets.
- AUTOMOBILE
Differential & Rear Axle Assembly
Working differential with crown wheel, pinion and half shafts mounted on a stand.
- AUTOMOBILE
Hydraulic Brake System (4 Drum)
Working four-wheel hydraulic drum brake layout with master cylinder, wheel cylinders and pedal.
- AUTOMOBILE
Disc Brake Assembly
Sectioned disc brake with caliper, pads and rotor for teaching modern braking systems.
- AUTOMOBILE
Diaphragm Clutch Assembly
Diaphragm spring clutch with flywheel, pressure plate and release bearing.
- AUTOMOBILE
Power Steering System
Hydraulic power steering with pump, rack and valve, mounted for live demonstration.
- AUTOMOBILE
Front Suspension System Model
Independent front suspension with coil spring, shock absorber and wishbones.
- AUTOMOBILE
Turbocharger (Cut Section)
Sectioned turbocharger showing turbine and compressor wheels on a common shaft.
- AUTOMOBILE
Layout of Car Wiring (Electrical Board)
Electrical equipment board of a car with lighting, horn, wiper and ignition circuits.
- AUTOMOBILE
Steering Geometry & Wheel Alignment Trainer
Trainer for measuring camber, caster, king-pin inclination and toe-in/toe-out.
- MECHANISMS
Motorised Gyroscope
Motor-driven gyroscope with variable speed control and weights to verify the gyroscopic couple.
- MECHANISMS
Whirling of Shaft Apparatus
Variable-speed motor with shafts of different diameters and end conditions to determine critical speed.
- MECHANISMS
Universal Vibration Apparatus
Multipurpose frame for free and forced vibration experiments on springs, pendulums and beams.
- MECHANISMS
Cam Analysis Apparatus
Motorised cam-follower rig with interchangeable cams and followers to study jump phenomenon.
- MECHANISMS
Static & Dynamic Balancing Apparatus
Rotating shaft with adjustable masses for static and dynamic balancing of rotating systems.
- MECHANISMS
Four Bar Link Mechanism
Demonstration model of four-bar chain and its inversions.
- MECHANISMS
Whitworth Quick Return Mechanism
Working model of Whitworth quick return motion used in shaping machines.
- MECHANISMS
Pantograph Model
Pantograph linkage for reproducing figures at enlarged or reduced scale.
- MECHANISMS
Simple Screw Jack
Screw jack with effort pulley and weights for determining mechanical advantage and efficiency.
- MECHANISMS
Winch Crab (Double Purchase)
Double purchase crab winch on a wall bracket for lifting machine experiments.
- MECHANISMS
Worm & Worm Wheel
Worm and worm wheel lifting machine with load drum and effort wheel.
- MECHANISMS
Jib Crane Apparatus
Jib crane with spring balances in jib and tie to determine member forces.
- MECHANISMS
Combined Coil & Belt Friction Apparatus
Pulley with flat and V-belts and a rope to determine coefficient of friction and tension ratios.
- MECHANISMS
Slip & Creep Measurement Apparatus
Belt drive with tachometers to measure slip and creep between driver and driven pulleys.
- CIVIL
Vicat Needle Apparatus
Vicat apparatus with plunger and needles for consistency and setting time of cement.
- CIVIL
Brass Test Sieves
Set of IS brass test sieves (200 mm dia) from 4.75 mm to 75 micron with lid and pan.
- CIVIL
Gyratory Sieve Shaker
Motorised gyratory sieve shaker with timer for consistent particle size analysis.
- CIVIL
Bulk Density Apparatus
Calibrated cylindrical measures for determining bulk density and voids of aggregates.
- CIVIL
Pycnometer
Pycnometer with conical brass cap for specific gravity and water content of soils.
- CIVIL
Dynamic Cone Penetrometer
Field DCP with hammer and graduated rod for in-situ strength of subgrade soils.
- CIVIL
Model of Gravity Dam
Sectional teaching model of a gravity dam showing galleries, spillway and foundation.
- CIVIL
Model of Syphon Aqueduct
Cross-drainage work model showing canal passing over a drain as a syphon aqueduct.
- CIVIL
Model of Canal Drop
Teaching model of a canal fall with cistern and energy dissipation arrangement.
- CIVIL
Model of Fish Ladder
Model showing a fish pass arrangement across a weir or barrage.
- CIVIL
Model of Saddle Syphon Spillway
Sectional model demonstrating the priming and action of a saddle syphon spillway.
- CIVIL
Model of River Head Works
Layout model of diversion head works with weir, undersluices and canal head regulator.
- CIVIL
Two Storied Building Model
Sectional building model showing foundation, columns, beams, slab, staircase and finishes.
- PHARMACY
Tablet Dissolution Test Apparatus
USP-type dissolution tester with thermostatic water bath, paddle/basket and digital controls.
- PHARMACY
Tablet Disintegration Test Apparatus (Double Basket)
Two-basket disintegration tester with thermostatically controlled bath and timer.
- PHARMACY
Friability Tester
Roche-type friability tester with twin drums and digital counter.
- PHARMACY
Monsanto Hardness Tester
Spring-type tablet hardness tester for crushing strength measurement.
- PHARMACY
Actophotometer
Photocell-based activity cage with digital counter for locomotor activity studies.
- PHARMACY
Rota Rod Apparatus
Multi-compartment rotating rod with speed control for muscle coordination studies.
- PHARMACY
Electro Convulsiometer
Electro-convulsive shock apparatus with variable current and timer for anticonvulsant screening.
- PHARMACY
Analgesiometer (Tail Flick)
Radiant-heat tail flick analgesiometer with timer for analgesic activity evaluation.
- PHARMACY
Student Organ Bath (Double Unit)
Thermostatic organ bath with aeration and kymograph-ready lever assembly.
- PHARMACY
Sherrington's Rotating Drum (Kymograph)
Variable speed recording drum for physiological and pharmacological recordings.
- PHARMACY
Capsule Filling Machine
Hand-operated capsule filling machine with loading tray and powder plate.
- PHARMACY
Tablet Coating Pan with Hot Air Blower
Stainless steel coating pan with motor drive and hot-air blower for sugar and film coating.
- PHARMACY
Hand Operated Tablet Machine
Single-punch hand-operated tablet press for compression studies.
- PHARMACY
B.O.D. Incubator
Low-temperature incubator with digital PID control for microbiology and BOD studies.
- PHARMACY
Polarimeter
Circular-scale polarimeter with sodium lamp for optical rotation of solutions.
- PHARMACY
Photoelectric Colorimeter
Filter colorimeter with digital display for absorbance and concentration measurement.
- PHARMACY
Compound Microscope
Laboratory compound microscope with mechanical stage and multiple objectives.
- PHARMACY
Muffle Furnace
Laboratory muffle furnace with digital temperature controller for ashing and heat treatment.
- PHARMACY
Ball Mill
Laboratory ball mill with variable speed for size reduction studies.
- PHARMACY
Magnetic Stirrer with Hot Plate
Magnetic stirrer with heating plate and independent speed and temperature control.
- PAPER TESTING
Digital Bursting Strength Tester (Single Head)
Digital bursting strength tester for paper and board with automatic peak hold.
- PAPER TESTING
Digital Bursting Strength Tester (Double Head)
Twin-head bursting strength tester for paper and corrugated board testing.
- PAPER TESTING
Box Compression Tester
Motorised box compression tester with digital load indicator for corrugated boxes.
- PAPER TESTING
Cobb Sizing Tester
Cobb tester to measure water absorptiveness of sized paper and board.
- PAPER TESTING
Digital Ring Crush Tester (ECT / FCT)
Compression tester for ring crush, edge crush and flat crush tests.
- PAPER TESTING
Digital Tear Tester
Elmendorf-type tearing resistance tester with digital readout.
- PAPER TESTING
Digital Scuff & Rub Tester
Rub resistance tester for printed surfaces and packaging materials.
- PAPER TESTING
Digital Plybond Tester
Internal bond strength tester for multi-ply paper and board.
- PAPER TESTING
Dart Impact Tester
Free-falling dart impact tester for plastic films and laminates.
- PAPER TESTING
Consistency Transmitter
Inline pulp consistency transmitter for paper mill process control.
- PAPER TESTING
V-Notch Basis Weight Control Valve
Precision V-notch control valve for stock flow and basis weight regulation.
- PAPER TESTING
Disc Pelletizer
Inclined disc pelletizer for agglomeration of fine powders into pellets.
- WORKSHOP
Sand Rammer
Standard sand rammer for preparing AFS test specimens of moulding sand.
- WORKSHOP
Sand Permeability Meter
Permeability meter for determining the permeability number of moulding sand.
- WORKSHOP
Mould Hardness Tester
Spring-loaded hardness tester for green sand moulds.
- WORKSHOP
Metallurgical Polishing Machine (Double Disc)
Double disc polishing machine for metallographic specimen preparation.
- WORKSHOP
Tubular Furnace
Horizontal tubular furnace with temperature controller for heat treatment studies.
- WORKSHOP
Slip Gauge Set (83 Pieces)
Precision slip gauge set in a fitted wooden box for length standards and calibration.
- WORKSHOP
Sine Bar
Precision sine bar for accurate angle measurement with slip gauges.
- WORKSHOP
Bevel Protractor
Universal bevel protractor with vernier scale for angular measurement.
- WORKSHOP
Bourdon Tube Pressure Gauge (Demonstration)
Open-dial Bourdon tube pressure gauge showing internal mechanism.
- KL · ELECTRICALELECTRICAL
Kirchhoff's Laws Trainer
Trainer board for measuring branch currents and voltages to verify Kirchhoff's current and voltage laws.
- NT · ELECTRICALELECTRICAL
Network Theorems Trainer (Thevenin / Norton / Superposition)
Multi-theorem network trainer with sources, resistive networks and meters.
- ST · ELECTRICALELECTRICAL
Star–Delta Transformation Trainer
Resistive network board for verifying star–delta and delta–star equivalence.
- KD · ELECTRICALELECTRICAL
Kelvin's Double Bridge
Bridge for precise measurement of low resistances.
- SB · ELECTRICALELECTRICAL
Schering Bridge
AC bridge for measurement of unknown capacitance and dissipation factor.
- MA · ELECTRICALELECTRICAL
Maxwell / Anderson Bridge
AC bridge for measurement of unknown inductance.
- DS · ELECTRICALELECTRICAL
DC Shunt Motor with 3-Point / 4-Point Starter
DC shunt motor set with starter, loading arrangement and meters on a panel.
- SP · ELECTRICALELECTRICAL
Single Phase Transformer Trainer
Single phase transformer panel for voltage/current ratio, OC and SC tests.
- LT · ELECTRICALELECTRICAL
LVDT Trainer
Linear variable differential transformer with micrometer and signal conditioning.
- ELECTRICAL
Temperature Measurement Tutor (Thermocouple / RTD)
Instrumentation tutor for temperature measurement using thermocouple and RTD sensors.
- SM · ELECTRICALELECTRICAL
Strain Measurement Tutor (Cantilever Beam)
Strain gauge cantilever with bridge amplifier and digital indicator.